PVC Fittings
Fittings are offered as bends (45°/87°), single branch, tee branch, double branch, reducer, access cap, sliding sleeve, socket plug and clamp in the same diameter range.
- Material
- PVC-U
- Joint
- Socket and O-ring seal
- Product range
- 13 pieces
- Expansion allowance
- ≈ 10 mm
- Use
- Wastewater inside and outside the building
General information
Fittings are offered as bends (45°/87°), single branch, tee branch, double branch, reducer, access cap, sliding sleeve, socket plug and clamp in the same diameter range.
The pipe end is not pushed all the way into the socket; an expansion allowance of approximately 10 mm is left beyond the seal seat. To ease assembly, only soft soap should be applied to the seal surface and the pipe entry section; mineral oils and similar lubricants damage the seal.
- TS 275-1
- TS EN 1329-1
13 products
01Bend 45° — Type 1
02Bend 87° — Type 1
03Single branch 45° — Type 1
04Tee branch 87° — Type 1
05Double branch 45° — Type 1
06Reducer — Type 1
07Access tee
08S trap
09Sliding sleeve
10Socket plug
11Vent stack
12Adapter seal
13Clamp
Let's grow together.
We have dealerships in Türkiye and around the world. You can send us your dealership applications using the details on our contact page or by filling in our dealership form.