3. Advantages

• Munting is easy and fast, labour cost is low.

• PEX pipes that pass through protective sheath may be replaced in case of a failure.

• Resistant to high temperature and pressure.

• Strong resistance against stokes at low temperatures.

• Long lasting

• Odour free and silent

• Resistant to chemical substances.

• Does not affected from acids and bases.

• No calcification and corrosion

• Hygenic

• Low friction coefficient

• Flexible

4. Application Area

• Floor heating systems

• Central heating units

• Snow melting applications

• It is mainly used safely in each hot and cold water systems applications.

Basic points to be considered in order to have safe and problem free mounting

a. Take in consideration of replacement in case of failure and mount horizontally and avoid the sharp twists while mounting.

b. To aviod the damage from the metals like screw thread, remember to mark the pipe`s coorinates that go through a closed area.

c. Install the pipes at temperature that is over the freezing ponit.

d. In order to avoid rust or powder get into the pipes, keep the ends closed until the installation is finished.

e. Keep the conjuction points open in order to make adjustments

f. Do not cover the system until the tests are proceeded

g. Do not expose pipes to direct sunlight.

h. Pass a protective sheath under the alum. This protective sheath will also act like an airbag and help heat isolation.

i. Be careful of protection sheath being in spiral form in order not to cause cross section narrowing.

In order to determine the incoming and outgoing water directions, use red protective sheath for hot water and blue for cold water.